Инструкция на TT-5.5F4 (новый, англ.)Страница 16 из 30
The oil line of electrical carriage from manual selector to oil tank. -open the hydraulic oil tank, add 18L of hydraulic oil into the oil tank, the hydraulic oil is provided by the user. ^
Make sure the clean of hydraulic oil, prevent any impurity into the oil line, lead the digest of the oil line and no working of the solenoid valve. -press the “power” button to turn on power, clicking the “up” button, check whether the motor turns clockwise (looking downward), if not press “power” button, change the phase of the motor. When turn on power, there is high voltage in the control box, only authorized person can operate. Main machine adjustment -Turn the selector switch on the control panel to the “main” position. -press “up” button SB1, lift crossbeam approximately 1000mm. -press “down” button SB2, verity the safety instruction. -press “down” button SB2, adjust the safety instruction on the frame of the crossbeam. Then lower the platform. Rolling jack adjustment If equipped with manual carriage. -press manual hydraulic hand, lift approximately 300mm -unfasten the manual, lift the safety rod of rolling jack, lower the rolling jack. Страницы: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 |
